Description Angular designed bollard installed with OSRAM LED and manufactured with corrosion resistant extruded aluminium. SE7EN is architectural when off but simply better on. No visible screws, no light spill over the horizontal, pre wired cable with IP68 connections and IP66 lamp compartment SE7EN ticks all the construction boxes. It can be installed in walkways, parks, commercial areas and open spaces. It provides directional illumination for any architectural environ as well as being an eye-catching object. SPEC • Designed, Manufactured and Tested according to IEC 60598-1, IEC 60598-2-1 and VDE regulations. • LM6 Die Cast Aluminium and Extruded Aluminium body. • Stainless steel screws. • Nano Ceramic surface conversion. • Double layer coating. • Safety glass cover. • Post-cured silicone gasket. • High quality LED module and driver. • GFR PA6.6 Terminal block. • Weather proof TPE grommet. • Bollard pre-wired with outdoor cable. • Installation work has to be carried on according to the enclosed product manual.
Ampoules disponibles | Puissance nominative du lampe | Flux lumineux de la source | Efficacité lumineuse | CCT | CRI |
---|---|---|---|---|---|
1 x LED | 5,2 W | 750 lm | 144 lm/W | 3000 K | 80 |
Type de montage
Borne
Forme et dimensions
Longueur: 178 mm
Largeur: 290 mm
Hauteur: 786 mm
Réglable
Rigide
Électrique
Puissance du système: 7 W
Classe de protection: II
Types de protection
IP: 66
IK: 08
Fichier Photométrique
ZIP file