Product data sheet

SE7EN Bollard

7170-N-3-921-XX

Unilamp

Description Angular designed bollard installed with OSRAM LED and manufactured with corrosion resistant extruded aluminium. SE7EN is architectural when off but simply better on. No visible screws, no light spill over the horizontal, pre wired cable with IP68 connections and IP66 lamp compartment SE7EN ticks all the construction boxes. It can be installed in walkways, parks, commercial areas and open spaces. It provides directional illumination for any architectural environ as well as being an eye-catching object. SPEC • Designed, Manufactured and Tested according to IEC 60598-1, IEC 60598-2-1 and VDE regulations. • LM6 Die Cast Aluminium and Extruded Aluminium body. • Stainless steel screws. • Nano Ceramic surface conversion. • Double layer coating. • Safety glass cover. • Post-cured silicone gasket. • High quality LED module and driver. • GFR PA6.6 Terminal block. • Weather proof TPE grommet. • Bollard pre-wired with outdoor cable. • Installation work has to be carried on according to the enclosed product manual. 

Available equipment Nominal lamp power Lamp flux Luminous efficacy CCT CRI
1 x LED 5.2 W 750 lm 144 lm/W 3000 K 80
SE7EN Bollard

SE7EN Bollard 

Light output 1 

1 x LED 

Mounting mode 

Standing / Bollard

Shape and measurements 

Length: 178 mm

Width: 290 mm

Height: 786 mm

Adjustability 

Fixed

Electric 

System power: 7 W

Appliance Class: II

Protection 

IP: 66

IK: 08

Photometric data

ZIP file