Fichier produit

FT Escape 150lm AT MNM Tel, 1-3H (set to 1 h operation)

FT2SE150ATT13

Eaton Emergency Lighting

Image du produit 1: FT Escape 150lm AT MNM Tel, 1-3H (set to 1 h operation)
Image du produit 1: FT Escape 150lm AT MNM Tel, 1-3H (set to 1 h operation)

Image du produit 1: FT Escape 150lm AT MNM Tel, 1-3H (set to 1 h operation) 

 

IP
43

IK
07

• LED self-contained luminaire with Automatic Test (AT) for reduced inspection effort • Safety luminaire, light distribution optimized for escape route application • Non obstrusive design and slim housing (31.2 mm) • Good lighting performance and spacing in a compact housing • Possibility to modify the light distribution by changing the optical lens (option) • Same aesthetic in IP43 and IP65 versions • Selectable operating time (1/1,5/2/3h operation) • Selectable operation mode (M or NM) via jumper • Large working space, cable entries in flexible material and spirit level for easy and fast installation • Transparent base plate with honeycomb footprint for easy replacement of existing products (IP4x use only) • Low eco footprint thanks to eco designed luminaire, low consumption and Lithium battery • Simple fault analysis and status display via bicolor LED • Complete range of accessories (Recess Kit for Ceiling, Recessed Box for plaster and brick wall, Wire Guard) • Other colours available on demand 

Type de source Puissance nominative du lampe Flux totale Efficacité lumineuse CCT CRI
LED 2 W 100 lm 50 lm/W 6500 K 80
FT Escape 150lm AT MNM Tel, 1-3H (set to 1 h operation)

FT Escape 150lm AT MNM Tel, 1-3H (set to 1 h operation) 

Surface lumineux 1 (integré) 

LED 

Type de source Puissance nominative du lampe Flux totale Efficacité lumineuse CCT CRI
LED 2 W 150 lm 75 lm/W 6500 K 80
FT Escape 150lm AT MNM Tel, 1-3H (set to 1 h operation)

FT Escape 150lm AT MNM Tel, 1-3H (set to 1 h operation) 

Surface lumineux 2 (integré, éclairage de secours) 

LED 

Type de montage 

Plafonnier

Forme et dimensions 

Longueur: 230 mm

Largeur: 120 mm

Hauteur: 20 mm

Réglable 

Rigide

Électrique 

Puissance du système: 4 W

Classe de protection: II

Informations sur l'éclairage de secours 

Éclairage de secours supplementaire

Bloc d´alimentation de secours: Avec batterie individuelle 1h, Avec batterie individuelle 1.5h, Avec batterie individuelle 3h, Avec batterie individuelle 3h

Luminaire de sécurité: Inexistant

Types de protection 

IP: 43

IK: 07

Fichier Photométrique

ZIP file