Recessed luminaire; Sheet steel housing suitable for cut-out ceilings and panel ceilings; prepared for fixing of end faces or for mounting in light run arrangements; white coated, similar to RAL 9016; Housing colour traffic white RAL 9016. Light distribution direct distribution by means of Satin-finished diffuser of Polycarbonate profile, Glare reduction using diffuse distribution frosted polycarbonate profile; diffuser is optically seamless for light run mounting. The light source and driver are removable in accordance with the EU 2019/2020 ecodesign requirements and can be replaced in the factory. Integrated driver. Electrical connection via 3-pole connection terminal with plug-in contacts.. Required accessories: end faces and universal attachment clips UBD for cut-out ceilings or WSPHL for panel ceilings; please order separately. Dimensions (LxWxHxD): 1176mm x 84mm x 76mm x 72mm Ceiling system: cut-out ceilings [AD], panel ceilings [PD] (module 100) Installation depth: 155mm [AD] Ceiling cut-out (LxW/D): L(+L+L..)+10mm x 74mm Beam angle: 105°(C0)/110° (C90) Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K Colour tolerance: 3SDCM LED service life: 50000h L80/B10 (Tq 25°C) Nominal luminous flux: 2451lm Luminaire luminous efficiency: 106lm/W Control gear: Electronic driver (1 pcs.) System output: 23W Energy efficiency class/light source: C Mains voltage: 230V Mains frequency: 50Hz Impact resistance (IK rating): IK02 Ambient temperatur: ta 25°C UGR lat./long.: 24.8 / 24.9 Certification mark: IP20, Protection class I, F, Indoor, CE Warranty period: 5 years Regiolux GmbH Type: hokal-HLEG/1200-1 LED 2400 840 ET vw RAL 9016 Article number: 60521024180 Product deep link: https://www.regiolux.de/en/article/60521024180 General warranty conditions: www.regiolux.de/en/Service/Warranty