Tago 6.3 linear profile for outdoor applications; surface mounted (ceiling, wall, floor); Power consumption: 55W, 49W; Power supply: 230Vac, 48Vdc; Lumen output at source: 8280 lm, R: 576 lm G: 3792 lm B: 912 lm W: 3000 lm (4000K); Delivered lumen output: 5496 lm, R: 360 lm G: 2640 lm B: 528 lm W: 1968 lm (4000K, 24°); 96 high power LEDs, 60 000h L80 B10 (Ta 25°C); LED colour: RGBW; Optics: 24°, 30°, 52°: optical system composed of a series of equidistant light sources, 41.7 mm apart. The TIR lens, made of PMMA, guarantees high-quality light emission and visual comfort; Body material: body made of Anticorodal® low-copper-content aluminium EN AW 6060 T5 for excellent heat dissipation, manufactured from an extruded profile and painted black (RAL 9005 matt) for excellent corrosion resistance. Caps made of black-painted (RAL 9005 matt) low-copper-content die-cast aluminium EN AB 47100. Finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide greater resistance to corrosion and atmospheric agents. AISI 304 stainless steel bracket painted matt RAL 9005 black with epoxy paint. Bushings in AISI 316L stainless steel, made with a CNC lathe. GORE-TEX valve to relieve the internal pressure; Finishes: black finish (RAL 9005 matt) obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1000 hours of salt spray (RAL 9005); RAL finish on request; Screen material: 4-mm-thick transparent, tempered extra-clear glass, high-transmittance with grey-vitrified serigraphy (RAL 7015), to ensure chromatic uniformity and excellent resistance to knocks and scratches; Seals: black Santoprene™ O-rings guarantee lasting resistance to UV rays; Installation: DMX+RDM version: IP68 H-style three-port, four-pole connector for the power supply, and IP68 three-pin female connector and IP68 three-pin male connector for the DMX+RDM signal; built-in power supply unit, power supply unit not included; 230Vac: includes 1.5 m neoprene cable H07RN-F 3x1.0 Ø9.3 mm and 2 cables for DMX signal with shielded cable of 0.75 m Ø5.5 mm 48Vdc: includes 1.5 m neoprene cable H07RN-F 2x1.0 Ø8.7 mm and 2 cables for DMX signal with shielded cable of 0.75 m Ø5.5 mm; Control system: DMX512+RDM; Ingress protection: IP65, IP67, IP69; Impact resistance: IK09; brackets with two pivot points for accurate adjustment; Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; Operating temperature: -20°C — +45°C; Maximum device temperature: 40°C (Ta 25°C); Photobiological safety: in accordance with IEC TR 62778:2014; Appliance class: class I (230Vac), class III (48Vdc); Weight: 230Vac: 5600 g, 48Vdc: 5400 g; Dimensions: 74x149x1036 mm; Energy efficiency class: F (light source) in accordance with EU 2019/2015; Accessories: WFA0105 5-m 3-pin interconnect cable, WFA02 IP68 “h”-type three-way connector, WFA03 3-pin female connector, WFA04 3-pin male connector, WMA03N Pair of adjustable brackets; tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption