Wall mounted for outdoor applications, single beam; surface mounted (wall); Power: 17W; Power supply: 24Vdc; Lumen output at source: 1646 lm (3000K, CRI 80), 1368 lm (3000K, CRI 90); Delivered lumen output: 1386 lm (3000K, 12°, CRI 80), 1152 lm (3000K, 12°, CRI 90); 1 high power density COB LED, 2-step MacAdam, 50 000h L95 B10 (Ta 25°C); LED colour: 2700K, 3000K, 4000K; Optics: 12°, 23°, 57°: optical system consisting of a high-efficiency metallized technopolymer reflector, asymmetrical 28°: optical system consisting of a high-efficiency spherical lens with an asymmetrical holder in black anti-glare technopolymer, asymmetrical: optical system consisting of an asymmetrical technopolymer lens, wall grazing: optical system consisting of a high-efficiency metallized technopolymer reflector and technical filter. An anti-glare black technopolymer holder completes the optical system; CRI: 80, 90; Body material: body made of low-copper-content die-cast aluminium alloy EN AB 46100 for excellent resistance to corrosion; Finishes: white finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, anthracite finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, cor-ten finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of primer, which enables the fixture to be painted with paints such as two-pack polyurethane varnishes and two-pack acrylic paints suitable for masonry surfaces, grey finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector; RAL finish on request; Screen material: 4-mm-thick transparent extra-clear glass with vitrified serigraphy, high transmittance to ensure chromatic uniformity of light and tempered for excellent resistance to knocks and scratches; Installation: the device must be installed with the speaker facing down; power supply unit not included; Ingress protection: IP65; Impact resistance: IK04; single-beam version with built-in speaker; version compatible with Google Home or Amazon Echo available on request for voice command control; Operating temperature: -20°C — +45°C; Maximum device temperature: 50°C (Ta 25°C); Glow wire test: 960°; Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006; Appliance class: III; Weight: 4840 g; Dimensions: 166x110x330 mm; Energy efficiency class: A / A+ / A++; Accessories: honeycomb louvre, WUNT39A00 Bluetooth 3.0 audio control kit with power supply unit and amplifier; tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption