Series: PLANOX UNI Classic moisture-proof diffuser luminaire with two-part luminaire design. Housing made of shockproof, UV-resistant plastic (polycarbonate). Injected silicone-based seal with increased resistance even under extreme conditions. Diffuser made of shockproof opal plastic (polycarbonate) with excellent light transmission of up to 90%. Diffuser fixed by stainless steel clips for easy installation and opening. Symmetrical light distribution. Homogeneous light distribution. Flexible and easy installation thanks to sliding quick-fix brackets made of stainless steel and diffuser with integrated gear tray as well as variable cable entry (face or rear sided). Suitable for Ceiling mounting, Suspension cable/chain, Wall (surface). Ceiling mounting stainless steel brackets and triangular brackets for pendant mounting included in delivery. Driver integrated. MultiLumen: 4 steps adjustable luminous flux. Factory-set to maximum luminous flux. Suitable for through-wiring. Luminaire with limited surface temperature in accordance with EN 60598-2-24 for use in environments where conductive dust deposits on the luminaire can be expected. Suitable for use in the food and drinks industry. Suitable for lighting in public car parks and public off-street parking spaces according to DIN 67528. Replaceable components make repairs possible and extend the service life. Colour: light grey (RAL 7035) Length: 1454 mm Width: 102 mm Height: 81 mm Lamp: LED Socket: without socket Colour temperature: 4000K Colour rendering index (CRI): 80 System power: 47 W Rated luminous flux: 7700 lm Beam angle Down: 124° / 101° Luminous efficiency: 164 lm/W System power 2: 55 W Rated luminous flux 2: 8750 lm Luminous efficiency 2: 159 lm/W System power 3: 63 W Rated luminous flux 3: 9900 lm Luminous efficiency 3: 157 lm/W System power 4: 72 W Rated luminous flux 4: 11000 lm Luminous efficiency 4: 153 lm/W Control gear: Regulated power supply Protection class: I Type of protection: IP 66