Olo Wood 1.1 bollard for outdoor applications; surface mounted (floor); Power consumption: 14W, 19W; Power supply: 230Vac; Lumen output at source: 2240 lm (3000K, 14W), 3200 lm (3000K, 19W); Delivered lumen output: 1460 lm (3000K, 180°, 14W), 2057 lm (3000K, 360°, 19W); 72 mid-power LEDs, 3-step MacAdam, 60 000h L90 B10 (Ta 25°C), 156 mid-power LEDs, 3-step MacAdam, 60 000h L90 B10 (Ta 25°C); LED colour: 2200K, 2200K+3000K, 2700K, 3000K, 4000K; Optics: radial 180°, radial 360°; CRI Colour Rendering Index: 80; Body material: Head made of low-copper-content die-cast aluminium alloy EN AB 47100 for excellent resistance to corrosion, body in teak wood and mounting base in AISI 316L stainless steel.; Finishes: anthracite finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector; RAL finish on request; Screen material: screen made of optical grade polycarbonate with anti-UV coating, characterised by excellent resistance to impacts; Seals: the silicone rubber gaskets guarantee maximum resistance to UV rays and unchanging mechanical characteristics over time; built-in power supply unit; includes two ### neoprene cables, H05RN-F 2x1.00 Ø6.7 mm and H05RN-F 2x0.75 Ø6.4 mm, includes ### neoprene cable, H05RN-F 2x1.0 Ø6.7 mm; Control system: DALI-2, ON/OFF; Ingress protection: IP66; Impact resistance: IK10; Operating temperature: -20°C — +50°C; Photobiological safety: in accordance with IEC TR 62778:2014; Appliance class: class II; Weight: 4900 g (360°) - 5100 g (180°); Dimensions: Ø206x1000 mm; Energy efficiency class: F (light source) in accordance with EU 2019/2015; Accessories: WFA02 IP68 “h”-type three-way connector (82x53.3x28 mm), WFA06 Two-pin male-female connector, WULL10A0 Kit anchor bolts; tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption