Housing: aluminium. Optics: in high-performance and anti-glare matt aluminium. Diffuser: tempered glass, 4 mm thick, resistant to thermal shock and impact (UNI EN 12150-1:2001). Coating: the fully automated powder-coating cycle involves a polyester-based, salt-spray corrosion-resistant and UV-stabilised paint. Special coating: Upon request: protective coating recommended for marine environments within 5 km (3 miles) of the sea. Heat Sink: the heat sink is designed and made to allow the LEDs to operate at temperatures capable of ensuring excellent performance/output and long service life. Wiring: power supply 220-240V 50/60Hz; with external IP66 driver on board the fixture. Low flicker: luminaire with very low flicker: evenly distributed light for greater visual safety. Photobiological risk: exempt risk group according to EN62471. : EN60598-1. They have a degree of protection according to the EN60529 standard. Equipment: - with galvanised and painted bracket - EN 61547 compliant surge protection. - anti-condensation valve - goniometric scale - silicone rubber gasket - external screws and bolts in stainless steel Temperature Chart (Description): Ta indoor = -40°C ÷ +35° / Ta outdoor = -40°C ÷ +45° On request: - protection up to 10KV. - possibility of central light management or with external presence/light sensors - with CLD D-D wiring (DALI), subcode -0041