- Lamp LED - CRI Ra > 80 - MacAdam Ellipse 3 SDCM - Colour 3000K and 4000K - Die-cast aluminium housing - Extruded aluminium column - Pre-treated before powder coating ensuring high corrosion resistance - Stainless steel fasteners in grade 304 with zinc flake coating (ZFC) - Durable silicone rubber gasket - High-efficiency optical reflector or PMMA lens - Clear UV-stabilised polycarbonate diffuser - Solar panel mono-crystalline silicon high-efficiency 4x10W - Lithium Iron Phosphate (LiFePO4 ) battery 16.5Ah 12Vdc - Solar charger controller system 12V 10A - Luminaires operation time depends on the weather conditions - Full automatic electronic protection function against short circuit, overcurrent, overload, overvoltage and high temperature - Standard: Off-grid, 100% solar, not connected to the utility grid. Utility grid connection is available upon request - Autonomy and Operation time calculations are done with the following information: Peak SunHour (PSH) is 3 hours. Hours of operation are 12 hours per day. Detection of movement is 5 times per hour. - Without any sun (Autonomy), the battery would last for maximum 5 days - Motion sensor integrated - Different dimming options are available - STD: 2 Step dimming with motion sensor override (3 hours: 60% without movement, 100% for 1 minute when the motion sensor activated. After 3 hours: 30% without movement, 60% for 1 minute when the motion sensor activated) - ND: Dusk to Dawn, CT: Custom examples are 5 Step dimming, Custom hours, Custom dimming levels (Step length and minimum dim level is 10%) - Maximum 35.5 hours of operation time (2 Step dimming with motion sensor override) - Remote solar charge controller can be ordered as an accessory