产品资料

METOPE 2.2 LL 36° [3000K 16W 110-230Vac]

TM221110005LLT

L&L Luce&Light

Metope 2.2 wall mounted for outdoor applications, double beam; surface mounted (wall); Power consumption: 13W, 16W; Power supply: 24Vdc, 230Vac; Lumen output at source: 1590 lm; Delivered lumen output: 1002 lm (52°, 3000K); 2 COB LEDs, 2-step MacAdam, 60 000h L80 B10 (Ta 25°C); LED colour: 2200K, 2700K, 3000K, 4000K; Optics: 21°+21°, 21°+52°, 26°+26°, 36°+36°, 52°+52°: double-beam optical system consisting of a high-efficiency, recessed TIR lens combined with a high-quality technical filter, diffuse: double-beam optical system consisting of a high-efficiency, recessed TIR lens combined with an opal technopolymer disc; CRI Colour Rendering Index: >90; Body material: body made of low-copper-content die-cast aluminium alloy EN AB 47100 for excellent resistance to corrosion; Finishes: white finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9003), finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of primer, which enables the fixture to be painted with paints such as two-pack polyurethane varnishes and two-pack acrylic paints suitable for masonry surfaces, anthracite finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, cor-ten finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector; RAL finish on request; Screen material: 3-mm-thick transparent extra-clear glass, with high transmittance to ensure chromatic uniformity of light and tempered for excellent resistance to knocks and scratches, with RAL 7015 grey vitrified serigraphy around the edge; Installation: the symmetrical mounting bracket means the device can be installed without any restrictions on orientation between the bracket and the body of the device; 230Vac: built-in power supply unit, 24Vdc: power supply unit not included; Control system: ON/OFF; Ingress protection: IP65; Impact resistance: IK05; Non-standard light output combinations available on request, spacer with RAL finish available on request; Operating temperature: -20°C — +50°C; Glow wire test: 960°; Appliance class: class II (230Vac), class III (24Vdc); Weight: 680 g; Dimensions: 51x76x150 mm; Energy efficiency class: F (light source) in accordance with EU 2019/2015; Accessories: honeycomb louvre, WDA207 Spacer - primer, WDA20E Spacer - white, WDA20H Spacer - anthracite, WDA20T Spacer - cor-ten; tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption 

现有设备 额定光源功率 光源光通量 光效 CCT CRI
1 x LED 9瓦 430 lm 54 lm/W 3000K 80
METOPE 2.2 LL 36° [3000K 16W 110-230Vac]

METOPE 2.2 LL 36° [3000K 16W 110-230Vac] 

光输出1 

1 x LED 

现有设备 额定光源功率 光源光通量 光效 CCT CRI
1 x LED 9瓦 430 lm 54 lm/W 3000K 80
METOPE 2.2 LL 36° [3000K 16W 110-230Vac]

METOPE 2.2 LL 36° [3000K 16W 110-230Vac] 

光输出2 

1 x LED 

安装方式 

壁装式

形状和尺寸 

长: 51毫米

宽: 75毫米

高: 150毫米

可调性 

固定

设计 

外罩颜色: 银灰, 白

电子 

系统功率: 16瓦

器具类: II

防护 

IP: 65

IK: 05

其他编号 

环境温度范围: -20...45°C

Photometric data

ZIP file