Housing: in die-cast aluminium with cooling fins integrated in the cover. Optics: in polycarbonate, highly resistant to temperature and UV radiation. Coating: the fully automated powder-coating cycle involves a polyester-based, salt-spray corrosion-resistant and UV-stabilised paint. Heat Sink: the heat sink is designed and made to allow the LEDs to operate at temperatures capable of ensuring excellent performance/output and long service life. Low flicker: luminaire with very low flicker: evenly distributed light for greater visual safety. Photobiological risk: exempt risk group according to EN62471. : EN60598-1. With degree of protection according to EN60529. The lighting fixture meets all IFS and BRC requirements, and the regulation of the HACCP Directive regarding lighting systems installed in food processing plants. Equipment: -waterproof connector for quick installation with no need to open the fixture -temperature controller with auto-reset -EN 61547 compliant surge protection. -As standard it comes with a programmable driver that regulates the supply current (to be requested separately from our sales office) to incorporate energy efficiency into any design. Mounting: Two attachment points: they are supplied with two steel cables (L= 25cm) having clamping ring for suspension mounting the fixture from two points of attachment. Warnings: Registered Design DM/100271 On request: -Class II fixtures, protection up to 10KV. -Centralized lighting point control or via external presence/lighting sensors. -Version for spaces with a high concentration of particular volatile chemicals around the luminaires. -EM version integrated as standard in the luminaire up to 200W max. For higher powers use separate box acc. 1175.