Outdoor luminaire for installation on wall or on pole. Configuration: die-cast aluminium structure. EN AB-47100 (low copper content) Double layer coating for high resistance to corrosion: The low copper Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. Pure aluminium optics, tempered extra-clear glass diffuser, silicone gaskets. The luminaire is equipped with a graduated stainless steel fixing plate allowing a precise installation on the wall.
Все источники света | Номинальная мощность лампы | Световой поток | Световая отдача | CCT | CRI |
---|---|---|---|---|---|
1 x Высоковольтные галогенки без отражателя | 300 Вт | 5000 lm | 10 lm/W | 3000 K | 100 |
Монтаж
Настенный
Форма и размеры
Длина: 290 мм
Ширина: 150 мм
Высота: 400 мм
Регулируемость
Вращающий
Электрика
Мощность: 300 Вт
класс защиты: I
Защита
IP: 65
IK: 07
Фотометрические данные
ZIP file