Wall mounted for outdoor applications, double beam; surface mounted (wall); Power: 20W; Power supply: 230Vac; Lumen output at source: 988 lm (3000K, CRI 80) per beam, 822 lm (3000K, CRI 90) per beam; Delivered lumen output: 837 lm (3000K, 15°, CRI 80) per beam, 696 lm (3000K, 15°, CRI 90) per beam; 2 high power density COB LEDs, 2-step MacAdam, 50 000h L95 B10 (Ta 25°C); LED colour: 2700K, 3000K, 4000K; Optics: 15°+15°, 15°+43°, 20°+20°, 43°+43°: double-beam optical system consisting of a high-efficiency metallized technopolymer reflector, asymmetrical 11° + wall grazing: optical system consisting of a high-efficiency spherical lens with an asymmetrical holder in black anti-glare technopolymer and high-efficiency metallized technopolymer reflector combined with a satin screen and technical filter, and a black anti-glare technopolymer holder, wall grazing + asymmetrical: double-beam optical system consisting of a high-efficiency metallized technopolymer reflector, technical filter, black anti-glare technopolymer holder and asymmetrical technopolymer lens, wall grazing + wall grazing: double-beam optical system consisting of a high-efficiency metallized technopolymer reflector combined with a satin screen and technical filter. An anti-glare black technopolymer holder completes the optical system; CRI: 80, 90; Body material: body made of low-copper-content die-cast aluminium alloy EN AB 46100 for excellent resistance to corrosion; Finishes: anthracite finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, grey finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of primer, which enables the fixture to be painted with paints such as two-pack polyurethane varnishes and two-pack acrylic paints suitable for masonry surfaces, white finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, cor-ten finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector; RAL finish on request; Screen material: 4-mm-thick transparent extra-clear glass, with high transmittance to ensure chromatic uniformity of light and tempered for excellent resistance to knocks and scratches, with a RAL 9005 black serigraphed border; Installation: the symmetric mounting bracket means the device can be installed without any restrictions on orientation between the bracket and the body of the device; built-in power supply unit; Control system: ON/OFF, 1-10V; Ingress protection: IP65; Impact resistance: IK04; version compatible with Google Home or Amazon Echo available on request for voice command control; DALI version available on request; Operating temperature: -20°C — +45°C; Maximum device temperature: 50°C (Ta 25°C); Glow wire test: 960°; Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006; Weight: 2200 g; Dimensions: 121x80x240 mm; Energy efficiency class: A / A+ / A++; Accessories: honeycomb louvre; tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption