NEW Version available on request without price surcharge. BOLLARD SHIFT PRO BOLLARD ROTOSYMMETRIC S.0450N 1 module LED 4000K 220-240Vac DIMMABLE DALI2; PUSH Rated module luminous flux: 3584lm Rated luminaire luminous flux: 1800lm Rated module power: 18W Rated luminaire power: 19.2W Luminaire efficacy: 94lm/W Voltage (AC): 220-240Vac Voltage (DC): 170-276Vdc (No PUSH DIM) Dimmable: DALI2; PUSH PUSH Synchronization: - Max 4 Luminaires, distance <15m; - Max 35 Luminaires, distance <300m with S.2490 accessory. Electrical insulation class: II Protection class IP: IP66 Mechanical resistance: IK10 CE LUMINAIRE TYPE Bollard fitting / Urban luminaire. IP rating IP 66 MATERIAL CHARACTERISTICS Aluminium die cast housing in EN AB-44300 (low copper content) and extruded EN AW-6060 with high resistance against corrosion. Extruded aluminium bollard. Galvanized and painted steel pole. Stone wash surface treatment prior to painting process. Steel Allen screws with insulating treatment against galvanic corrosion. Pre treated Silicone Gaskets. Extra-resistant Painting Process: Extra-resistant exterior coating. Product suitable for applications in high-humidity environments, C5 ZONE (according to UNI EN ISO 9223:2012). Mechanical resistance IK 10 LIGHTING PERFORMANCE The rotosymmetric version of Shift Pro distributes broad, uniform light around the pole. The 360° and 180° heads, with their special optics integrated into the cylindrical design, ensure visual comfort, high performance, and downward-directed emission in compliance with light pollution regulations. INSTALLATION AND MAINTENANCE Shift Pro Rotosymmetric pole with single head can be configured with up to 5 stacked multifunction heads, according to specific composition rules. Shift Pro Rotosymmetric with triple head does not allow the addition of any multifunction heads. Shift Pro bollard can be configured with up to 2 multifunction heads. All multifunction heads can be independently oriented. The lighting heads are equipped with DALI drivers, allowing each light source to be controlled separately from the others. WIRING Supply 0.2m cable section type H05RN-F . Single cable entry sealed with B component epoxy resin, wired internally. Isolation: CLASS II . Available colours: Anthracite grey (cod.24), Black (cod.09). Weight: 31.12 Kg Glow Wire test: 850°C LED module included SHIFT PRO PATENTED and REGISTERED DESIGN This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.This product contains a light source of energy efficiency class (EPREL - European Product Registry for Energy Labelling): E. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire min. 70.000 hours Ta 25°C, min. 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C. ELECTRONIC EQUIPMENT SENSITIVE TO OVERVOLTAGE.We recommend installing surge protection devices "SPD" in the electrical system. Protection devices prevent the intensity of these phenomena's, protecting the appliances from the risk of being damaged and extending the lifespan. Outdoor luminaires are subject to all types of permanent, temporary, or transient electrical disturbances. Such disturbances can create permanent damage or failure affecting its performance and durability. The surge protection device (supplied by SIMES) is utilized to limit the destructive effect of these phenomena. We suggest that each luminaire must be connected to one protection device at not more than 10m away. For correct coordination of the protections, a surge protection device must also be provided inside the electrical panel of the system (the selection of this device must be carried out from the electrical designer and is not supplied by SIMES). WARRANTY All items produced from 01/01/2026 onwards are covered by a 5 (five)-year warranty against manufacturing and conformity defects, in accordance with the terms and limits set out in the manufacturer's official documentation. For full details, exclusions and warranty activation procedures, please refer to the following link: www.simes.it/warranty