Информация о продукте

CONTINUOUS LINE FULL-GLASS 1.0m

S.7018T

SIMES

DRIVEOVER WALKOVER LINEAR CONTINUOUS LINE FULL GLASS ACID-ETCHED TUNABLE WHITE S.7018T module LED TUNABLE WHITE 2700K-4000K 24Vdc DIMMABLE PWM Rated module luminous flux: 715lm Rated luminaire luminous flux: 141lm Rated module power: 6W Rated luminaire power: 6W Luminaire efficacy: 24lm/W Voltage (DC): See the SIMES power supply accessories list on the following pages 24Vdc Dimmable: PWM Electrical insulation class: III Protection class IP: IP66/IP68 1m Mechanical resistance: IK10 CE ENEC LUMINAIRE TYPE Inground drive over fitting. Recessing depth 90 mm. IP rating IP 66/IP68 1m (Complete immersion for limited periods, not suitable for use in swimming pools or fountains). MATERIAL CHARACTERISTICS Fixing base and recessing box in extruded anodized EN AW-6060 aluminium housing (copper free) with high corrosion resistance. Mechanical resistance IK 10 Maximum load capacity 2000 Kg LIGHTING PERFORMANCE Toughened acid-etched glass diffusor 15 mm thick. Lamp fixed position. LOR -- LOW SURFACE TEMPERATURE Surface temperature of diffusor 39°C (Ta 25°C) RECESSING BOX The housing is realized in aluminium and it is supplied with a protective cover resistant to tearing, which is to be removed only after cementing the housing flush to the pavement, just before the final installation of the fitting. WIRING CONTINUOUS LINE is equipped with to-be-fixed supports to perfectly align additional fittings and provide easy installation. Using this simple system to join the housing and supports also assists in levelling the housings in a CONTINUOUS LINE. It is possible to level the fitting using screws. Luminaire hard wired with 0,15m SILICONE single cable. Gel connector IP68 supplied as standard for single cable connection. Connector housed inside the recessing box. The result is a continuous line of light. Isolation: CLASS III . Available colours: Anodized aluminium (cod.13). Weight: 6.124 Kg Glow Wire test: 850°C LED module included LINEA CONTINUA PATENTED 2013 This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.This product contains a light source of energy efficiency class (EPREL - European Product Registry for Energy Labelling): G. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire min. 70.000 hours Ta 25°C, min. 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C. WARRANTY All items produced from 01/01/2026 onwards are covered by a 5 (five)-year warranty against manufacturing and conformity defects, in accordance with the terms and limits set out in the manufacturer's official documentation. For full details, exclusions and warranty activation procedures, please refer to the following link: www.simes.it/warranty 

Тип лампы Номинальная мощность лампы Общий световой поток Световая отдача CCT CRI
LED 6 Вт 141 lm 24 lm/W 2606 K 92
CONTINUOUS LINE FULL-GLASS 1.0m

CONTINUOUS LINE FULL-GLASS 1.0m 

Световой выход 1 (интегрированный) 

LED 

Монтаж 

Грунтовые, Встраиваемый, Пристраиваемый

Форма и размеры 

Длина: 35 мм

Ширина: 35 мм

Высота: 1 мм

Регулируемость 

фиксированный

дизайн 

Поверхность: Стекло

Дизайнер: SIMES S.P.A.

Электрика 

Мощность: 6 Вт

контроллер: DMX, DALI

Светильники с изменяющимся цветом

класс защиты: III

Защита 

IP: 68

IK: 10

Макс. нагрузка точки (кг): 2000 кг

Обозначение: CE

Фотометрические данные

ZIP file