F-LINE-RT 1../ 2.. Pendant LED luminaire Design: Single LED luminaire for pendant mounting with very low-profile luminaire housing. Housing with seamless underside, in sheet steel, white powder coated (similar to RAL9016). Cover panel to the top of the luminaire with large openings for the indirect component. Housing top with fixing openings for variable step-by-step (35mm) luminaire fixture on the longitudinal side with wire pendants. For RIDI-TUBE 360 lamps (order separately), almost 360° emission. Lampholder system: Lamp base system RIDI-TUBE with electrical and mechanical interface, polarity reversal proof. Toolless lamp change twist-clip mechanism, corresponding to conventional fluorescent lamps. Mechanical and electrical fixture on the longitudinal sides inside the base. Automatic adjustment of the precise required electrical current with the newly developed lamp base. Electronic converter for LED, 230 Volt, 0/50-60 Hz and internal connector block. Suitable for direct voltage operation and use in central battery systems. Mounting: The luminaires are equipped with accessories for pendant installation with wire suspension. Wire suspension, length 1.5 metres ZSPT2Z 190 for F-LINE-RT1…, or ZSPT2Z 295 for F-LINE-RT2… to be ordered separately. Power supply cable, length 1.5 metres with transparent cover, to be ordered separately. Continuous-row installation with accessories F-LINE-VS luminaire connector possible. F-LINE-RT ... SM Parabolic mirror louvre SM in silk matt anodised super-purity aluminium with silver coating. For RIDI-TUBE 360 lamp (order separately), recommended cover: matt.