Series: PLANOX UNI Classic moisture-proof diffuser luminaire with two-part luminaire design. Housing made of shockproof, UV-resistant plastic (polycarbonate). Injected silicone-based seal with increased resistance even under extreme conditions. Diffuser made of UV-resistant opal plastic (PMMA) with excellent light transmission of up to 90% Diffuser fixed by stainless steel clips for easy installation and opening. Symmetrical light distribution. Homogeneous light distribution. Flexible and easy installation thanks to sliding quick-fix brackets made of stainless steel and diffuser with integrated gear tray as well as variable cable entry (face or rear sided). Suitable for Ceiling mounting, Suspension cable/chain, Wall (surface). Ceiling mounting stainless steel brackets and triangular brackets for pendant mounting included in delivery. MultiLumen: 2 steps adjustable luminous flux. Factory setting is HO (High Output). Through-wiring (2.5mm2) as standard. Luminaire with limited surface temperature in accordance with EN 60598-2-24 for use in environments where conductive dust deposits on the luminaire can be expected. Suitable for lighting in public car parks and public off-street parking spaces according to DIN 67528. Replaceable components make repairs possible and extend the service life. Colour: light grey (RAL 7035) Length: 615 mm Width: 102 mm Height: 85 mm Lamp: LED Socket: without socket Colour temperature: 4000K Colour rendering index (CRI): 80 System power: 14 W Rated luminous flux: 2200 lm Beam angle Down: 126° / 105° Luminous efficiency: 157 lm/W System power 2: 22 W Rated luminous flux 2: 3400 lm Luminous efficiency 2: 155 lm/W Control gear: Regulated power supply Protection class: I Type of protection: IP 66