Scheda tecnica

PRAGUE 7 Bollard

PRA-10062-T4-8040

LIGMAN

- Lamp LED - CRI Ra > 80 - MacAdam Ellipse 3 SDCM - Colour 3000K , 4000K - Die-cast aluminium housing - Extruded aluminium column - Pre-treated before powder coating ensuring high corrosion resistance - Stainless steel fasteners in grade 304 with zinc flake coating (ZFC) - Durable silicone rubber gasket - Clear toughened glass - High-efficiency PMMA lens - Integral control gear - Solar panel mono-crystalline silicon high-efficiency 4x10W - Lithium Iron Phosphate (LiFePO4 ) battery 16.5Ah 12Vdc - Solar charger controller system 12V 10A - Different dimming options are available: ND: Dusk to Dawn, CT: Custom (5 Step dimming, Custom hours, Custom dimming levels) - Maximum 15 hours of operation time (100%) - Without any sun (Autonomy), the battery would last for maximum 5 days - Full automatic electronic protection function against short circuit, overcurrent, overload, overvoltage and high temperature - Luminaires operation time depends on the weather conditions - Remote solar charge controller can be ordered as an accessory - Standard: Off-grid, 100% solar, not connected to the utility grid. Utility grid connection is available upon request - Autonomy and Operation time calculations are done with the following information: Peak SunHour (PSH) is 3 hours. Hours of operation is 12 hours per day 

Tipo di lampada Potenza nominale Flusso totale Emissione luminosa CCT CRI
LED 4 W 422 lm 106 lm/W 4000 K 80
PRAGUE 7 Bollard

PRAGUE 7 Bollard 

Emissione luce 1 (integrata) 

LED 

Tipo di montaggio 

Lampada da terra / Dissuasore

Forma e Dimensioni 

Lunghezza: 175 mm

Larghezza: 200 mm

Altezza: 500 mm

Peso: 5,7 kg

Regolazione 

Fisso

Protezione abbagliamento 

Protezione abbagliamento: Controllo abbagliamento: UGR < 19

Cablaggio / Dimming 

Potenza sistema: 4 W

Reattore: ECG

Dimmer: Dimmerabile 1..10V, DALI

Classe di protezione: III

Grado di protezione 

IP: 65

IK: 07

Temperatura superfici: 40 °C

Photometric data

ZIP file