SDT-Quick-fit mounting system, Device mount, Modullänge/1500. Device mount made of galvanised, profiled sheet steel; surface coated with polyester resin. Installation without tools with two integrated press-on fasteners. Can be used in the track on the left or right. Housing colour traffic white RAL 9016. Light distribution direct asymmetrical distribution by means of Individual.Lens.Optic of PMMA plastic, Continuous optics. Uniform LED spacing, even across the gap between circuit boards. 3-row LED arrangement. Light control components are easy to maintain thanks to the easily cleaned surface. The light source and driver are removable in accordance with the EU 2019/2020 ecodesign requirements and can be replaced in the factory. Heat-resistant cables with 2 fixed, 3-pin quick-fit rapid installation plug connectors with toolless phase pre-selection and locating finger. The device mount can be adjusted variably in steps with a multi-lumen driver. They are exchangeable, permit modernisation and reliably prolong the service life of the overall system. Additional information on the driver switching stages is available on the Internet on the product details page or in the product data sheet under the heading Operating Data. Dimensions (LxWxH): 1531mm x 55mm x 37mm Beam angle: 35°(C0)/50° (C90) Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K Colour tolerance: 3SDCM Photobiological safety (Luminaire): RG1 LED service life: 50000h L80/B10 (Tq 35°C) Nominal luminous flux/switching steps (rounded): 8100lm/53W, 7100lm/45W, 6000lm/37W, 4400lm/26W (Standard setting 8128lm) Luminaire luminous efficiency: 169lm/W-153lm/W Control gear: Electronic multi-lumen driver, 4-steps (1 pcs.) System output: 53W-26W Energy efficiency class/light source: D Mains voltage: 230V Mains frequency: 50Hz Impact resistance (IK rating): IK03 (-20°C bis 35°C) Ambient temperatur: ta -20°C to 35°C UGR lat./long.: 18.1 / 21.4 (53W) Certification mark: IP20, Protection class I, ENEC10 VDE, F, HACCP DIN10500/Food/IFS-application-related suitability (see certificate)/BRC, Indoor, CE Warranty period: 5 years Regiolux GmbH Type: SDGOA /1500 LED 8000-4000 840 ETM vw RAL 9016 Article number: 18558404100 Product deep link: https://www.regiolux.de/en/article/18558404100 General warranty conditions: www.regiolux.de/en/Service/Warranty