SDT-Quick-fit mounting system, IP 64 device mount, Modullänge/1500. Device mounts made of galvanised, profiled sheet steel with zinc coating combined with polyester resin paint guarantees good corrosion protection; tool-free attachment with design-integrated push locks ensure protection against theft and disassembly. Integrated end faces made of plastic with sealing lips and an all-round closed seal to the support rail for a protection type up to IP64. Housing colour traffic white RAL 9016. Light distribution direct, extra narrow distribution by means of Central.Line.Optic of PMMA plastic, The single lens optics have a transparent seal, ensure absolute ease of assembly and are simple to maintain thanks to the easily cleaned surface. The inner rhythm of the 3-row single lens arrangement and the overriding device mount are perfectly in tune to guarantee a homogeneous appearance in the object. The light source and driver are removable in accordance with the EU 2019/2020 ecodesign requirements and can be replaced in the factory. Heat-resistant cables including fixed, 4-pin, quick-fit plug connector with toolless phase preselection and locating finger; With 3h emergency lighting battery; Luminaire status by visible status LED in luminaire (NL-B3); Luminous flux in emergency light mode 927 lm. A wire of the feed-through wiring can be used as an unswitched charging phase via an additional pole on the plug connector;. The device mount can be adjusted variably in steps with a multi-lumen driver. They are exchangeable, permit modernisation and reliably prolong the service life of the overall system. Additional information on the driver switching stages is available on the Internet on the product details page or in the product data sheet under the heading Operating Data. Dimensions (LxWxH): 1535mm x 55mm x 37mm Beam angle: 25°(C0)/55° (C90) Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K Colour tolerance: 3SDCM Photobiological safety (Luminaire): RG1 LED service life: 50000h L80/B10 (Tq 35°C) Nominal luminous flux/switching steps (rounded): 8300lm/50W, 7200lm/43W, 6100lm/35W, 4300lm/25W (Standard setting 8258lm) Nominal luminous flux-emergency lighting mode: 927lm Luminaire luminous efficiency: 177lm/W-164lm/W Control gear: Electronic multi-lumen driver 3h emergency lighting, 4-steps (1 pcs.) System output: 50W-25W Energy efficiency class/light source: C Mains voltage: 230V Mains frequency: 50Hz Impact resistance (IK rating): IK03 (5°C bis 35°C) Ambient temperatur: ta 5°C to 35°C UGR lat./long.: 14.5 / 19.1 (50W) Certification mark: IP64, Protection class I, F, D, HACCP DIN10500/Food/IFS-application-related suitability (see certificate)/BRC, Indoor, CE Warranty period: 5 years Regiolux GmbH Type: SDGSCXT /1500 LED 8000-4000 840 ETM NL-B3 vw RAL 9016 Article number: 18748474100 Product deep link: https://www.regiolux.de/en/article/18748474100 General warranty conditions: www.regiolux.de/en/Service/Warranty