Series: CADERO quadra Decorative surface-mounted luminaire for outdoor use. Base and housing made of corrosion resistant pressure die-cast aluminium, seawater-resistant powder-coated (C4, in accordance with ISO 12944-6). C5 coating available on request. With membrane valve as a standard to avoid condensed water. Homogeneous and smooth light distribution. Clear crystal glass, painted inside, with fixing device. Base fixing slots outside of gasketed area, drill hole deviations can be compensated. Simple mounting spring system for installation without tools. Very easy installation thanks to plug-and-play connector system. The large connection compartment on the back for convenient connections is also ideal for through wiring. Integrated MultiLumen driver. MultiLumen: 4 steps adjustable luminous flux. Factory-set to maximum luminous flux. With integrated HF movement sensor and light sensor. Functional parameters of the motion detector (ceiling mounting up to 4.0 m or wall mounting up to 2.5 m): HF detector 5.8 GHz. Detection angle 30°-150°. Detection range up to 6 m radial, depending on mounting situation and diffuser. Hold time, daylight threshold and sensitivity adjustable via dip switch. As master luminaire switchable up to 400 W (resistive load), 300 VA (LED). Replaceable components make repairs possible and extend the service life. Colour: silver, matt (approx. RAL 9006) Length: 257 mm Width: 257 mm Height: 81 mm Lamp: LED System power: 6.8 W Rated luminous flux: 400 lm Luminous efficiency: 59 lm/W System power 2: 7.7 W Rated luminous flux 2: 470 lm System power 3: 8.6 W Rated luminous flux 3: 530 lm System power 4: 9.5 W Rated luminous flux 4: 590 lm Control gear: Sensor converter Protection class: I Type of protection: IP 65