Recessed linear luminaire for outdoor/indoor installation in ground or ceiling. • Double layer coating for high resistance to corrosion: The aluminium components are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Die-cast double closing end on each side allowing easy and safe maintenance, moulded silicone gasket, 8mm thick tempered sandblasted glass with silkscreen border mechanically fixed to the body by a silicone adhesive.Electrical components are installed on a removable frame.
Configurazioni disponibili | Potenza nominale | Flusso | Emissione luminosa | CCT | CRI |
---|---|---|---|---|---|
1 x Fluorescente lineare T5 (16mm) | 14 W | 1350 lm | 31 lm/W | 3000 K | 84 |
Tipo di montaggio
Incasso a pavimento
Forma e Dimensioni
Lunghezza: 645 mm
Larghezza: 100 mm
Altezza: 79 mm
Regolazione
Fisso
Cablaggio / Dimming
Potenza sistema: 14 W
Classe di protezione: II
Grado di protezione
IP: 67
IK: 09
Photometric data
ZIP file