Series: BOCARO Charging bollard with light top unit of the bollard system BOCARO with EV charger in accordance with IEC 61851-1 mode 3. PRO equipment variant for public areas. Standpipe from corrosion-resistant aluminium profile with cover from aluminium die casting, seawater-resistant powder-coated (C4, in accordance with ISO 12944-6). C5 coating available on request. Inspection door with triangular lock. Fully enclosed stainless steel mounting base also serves as collision protection in accordance with DIN IEC/TS 61439-7, an additional crash protection is not required. Elongated hole in the base for subsequent, simple alignment of the bollard. Integrated charging container made of aluminium in the standpipe attached to the C-track. Transparent plastic viewing window for control and checking of safety devices and charge controllers. Mains voltage LED module with protective cover made of clear toughened glass. Light top unit impact protection: IK06. Symmetrical light distribution. Charging bollard pre-installed ready for connection. 2 charging points equipped with type 2 charging sockets incl. hinged lid, connector lock, status indicator and RFID card reader for authentification. 1 charge point with display for user guidance and visualisation of consumption-relevant data. User language can be selected. 2 user RFID tags included in the scope of delivery. Control in a charging network with up to 12 charging points possible. Equipment PRO includes: charge controller, DC leakage current detection, load protection, load management, Fl circuit breaker type A/LS, lightning and surge protection, MID/ME compliant energy meter, LAN connection, OCPP interface for billing systems, compliant with calibration law, ISO 15118 compatible (plug-and-charge), solar-ready interface for charging current from PV systems. Additional functions such as user management, ad-hoc charging depend on the backend system used. For compliance with the calibration law on weights and measurements, at least one charging station with display is required in relation to the charging network. Colour: silver, matt (approx. RAL 9006) Dimensions: L 246, B 156, H 1570 Number of charging units: 2 Power per charging point: 22 kW Type of protection ev-charger: IP 54 Impact resistance ev-charger: IK08 Protection class: I Ambient temperature: -20 °C to +40 °C Light colour: 840 Rated luminous flux: 1950 lm