Outdoor luminaire for installation on wall or on post. Configuration: die-cast aluminium structure . EN AB-47100 (low copper content). Double layer coating for high resistance to corrosion: The low copper Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. Sandblasted glass. Moulded silicone gaskets.
Ampoules disponibles | Puissance nominative du lampe | Flux lumineux de la source | Efficacité lumineuse | CCT | CRI |
---|---|---|---|---|---|
1 x Iodures métalliques | 35 W | 3300 lm | 33 lm/W | 3000 K | 81 |
Type de montage
En applique
Forme et dimensions
Longueur: 160 mm
Largeur: 160 mm
Hauteur: 220 mm
Réglable
Rigide
Électrique
Puissance du système: 35 W
Classe de protection: I
Types de protection
IP: 65
IK: 05
Fichier Photométrique
ZIP file