SRT-Quick-fit mounting system, Variable device mount, Modullänge/1500. Device mount made of a galvanised, profiled steel sheet; surface coated with polyester resin. Tool-free attachment with integrated side lever catches for rapid fitting in the mounting rail. LED unit in housing length for an optically seamless light run. Variable position on the mounting rail. Housing colour black RAL 9005. Diffuser optics, Light distribution direct/indirect narrow/wide distribution by means of Prismatic diffuser with internal longitudinal prisms of PMMA plastic, creates a uniform, homogeneous finish with a brightening effect on the ceiling.. The light source and driver are removable in accordance with the EU 2019/2020 ecodesign requirements and can be replaced in the factory. Electrical connection by means of a 1m connection cable for variable device mount positioning with a 3-pin, quick-fit plug connector in the light run with free phase pre-selection. They are exchangeable, permit modernisation and reliably prolong the service life of the overall system. Dimensions (LxWxH): 1531mm x 63mm x 54mm Beam angle: 45° (C0)/100 ° (C90) Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K Colour tolerance: 3SDCM Photobiological safety (Luminaire): RG1 LED service life: 50000h L80/B10 (Tq 35°C) Nominal luminous flux: 6364lm Luminaire luminous efficiency: 185lm/W Control gear: Electronic driver (1 pcs.) System output: 34W Energy efficiency class/light source: B Mains voltage: 230V Mains frequency: 50Hz Impact resistance (IK rating): IK03 (10°C bis 35°C) Ambient temperatur: ta 10°C to 35°C UGR lat./long.: 23.2 / 23.2 Certification mark: IP20, Protection class I, ENEC10 VDE, F, HACCP DIN10500/Food/IFS-application-related suitability (see certificate)/BRC, Indoor, CE Warranty period: 5 years Regiolux GmbH Type: SRGVLP /1500 LED 6000 840 ET sw RAL 9005 Article number: 19155004024 Product deep link: https://www.regiolux.de/en/article/19155004024 General warranty conditions: www.regiolux.de/en/Service/Warranty