Diffuser luminaire Design: Single diffuser luminaire round, diameter 600 mm, with LED modules for ceiling or wall mounting. Circular, deep drawn rigid steel housing, white powder-coated. Sprung steel catches are used to fix the diffuser. Fitted with RIDI-LED modules. Rectangular LED modules mounted on the luminaire base and additionally on the cap profile bracket for homogenous illumination of the diffuser. LED modules with copper coating on both sides for optimum heat distribution. 2-channel design (...-2K) with two LED drivers per luminaire. Two LED circuits are each actuated by a driver, allowing separate switching (50/50), e.g. for night lighting. In versions with radar sensor (...-RS) one channel (50%) is switched to the sensor. TW: Luminaire with Tunable White (...-TW...), separate actuation of light colours 3000 and 6500 Kelvin. CAS: Luminaire with integrated Casambi module (...-CAS) for the wireless control of the luminaire via a smartphone or tablet. Electronic DALI converter for LED, 220-240 Volt, 0/50-60 Hz and internal connector block 5x2,5mm². Mounting: Direct ceiling or wall mounting without additional accessories. RUFO 600… Semi-circular acrylic glass diffuser made of impact-resistant, UV-stabilised PMMA. Satin finish on the diffuser surface. Impact resistance IK10.
Ampoules disponibles | Puissance nominative du lampe | Flux lumineux de la source | Efficacité lumineuse | CCT | CRI |
---|---|---|---|---|---|
1 x LED | 37 W | 5310 lm | 122 lm/W | 3000 K | 80 |
Type de montage
Plafonnier
Forme et dimensions
Longueur: 600 mm
Largeur: 600 mm
Hauteur: 165 mm
Réglable
Rigide
Électrique
Puissance du système: 37 W
Types de protection
IP: 20
Fichier Photométrique
ZIP file