• Outdoor luminaire for installation on ceiling. • Configuration: die-cast aluminium fixing base and frames, EN AB47100 alloy (low copper content). Extruded aluminium body. • Double layer coating for high resistance to corrosion: The aluminium components are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Tempered transparent glass and silicone gasket
Ampoules disponibles | Puissance nominative du lampe | Flux lumineux de la source | Efficacité lumineuse | CCT | CRI |
---|---|---|---|---|---|
1 x Iodures métalliques | 70 W | 7000 lm | 37 lm/W | 3000 K | 84 |
Type de montage
Plafonnier
Forme et dimensions
Longueur: 150 mm
Largeur: 150 mm
Hauteur: 290 mm
Réglable
Rigide
Électrique
Puissance du système: 70 W
Classe de protection: I
Types de protection
IP: 65
IK: 08
Fichier Photométrique
ZIP file