Fichier produit

i-P65 Plus H CG-S, PC

IP65PHPCGS

Eaton Emergency Lighting

• LED safety luminaire with high ingress protection class (IP65) for both indoor and outdoor use • Robust design (IK08) made from impact-resistant polycarbonate • With narrow-beam reflector technology, the i-P65+ H variant is especially suitable for exit route lighting with high spacing up to 30 m and mounting heights up to 26 m • High lumen output ensures suitability for increased illumination levels such as min 15 lx for high risk task areas or applications with 10.8 lx acc. NFPA 101 • With provisions for M20 cable entries on enclosure sides ( 3 x lateral and 1 x at each end side) and BESA entry on rear • Minimum maintenance effort and increased safety via use of LEDs with high service life (up to 60,000 h) • Shortened inspection effort due to CEWA GUARD technology • Automatic function monitoring for up to 20 luminaires per circuit • Reduced installation cost through STAR Technology • Freely programmable mixed operation, allowing the switching of luminaire modes within one circuit 

Type de source Puissance nominative du lampe Flux totale Efficacité lumineuse CCT CRI
LED 9,3 W 590 lm 63 lm/W 5000 K 80
i-P65 Plus H CG-S, PC

i-P65 Plus H CG-S, PC 

Surface lumineux 1 (integré) 

LED 

Type de source Puissance nominative du lampe Flux totale Efficacité lumineuse CCT CRI
LED 9,3 W 590 lm 63 lm/W 5000 K 80
i-P65 Plus H CG-S, PC

i-P65 Plus H CG-S, PC 

Surface lumineux 2 (integré, éclairage de secours) 

LED 

Type de montage 

Plafonnier

Forme et dimensions 

Longueur: 340 mm

Largeur: 168 mm

Hauteur: 81 mm

Réglable 

Rigide

Électrique 

Puissance du système: 18,6 W

Classe de protection: I

Informations sur l'éclairage de secours 

Éclairage de secours supplementaire

Bloc d´alimentation de secours: Batterie centrale

Luminaire de sécurité: Inexistant

Types de protection 

IP: 65

IK: 08

Fichier Photométrique

ZIP file