TECHNICAL CHARACTERISTICS: Industrial headlamps in die casting of grey painted aluminium. LEDs technology. equipped with SmartDrive LEDs (possibility to integrate programming, dimming and consumption monitoring functions) energy-saving electronic power supply. The device is designed to withstand magnetic disturbances typical of industrial environments (EN 61000-6-2). PRODUCT PROTECTION GRADE: IP66. PRODUCT IMPACT RESISTANCE: IK09 (10J). TEMPERATURE RANGE: -30÷60°C. BODY: High mechanical resistance in die-cast aluminum painted with gray polyester powders (RAL 7040). Stainless Steel closing hooks and hinges (AISI 304). Integrated rear dissipation fins. Cable input with PA66 Nylon press (PG13.5 8÷12mm) on the back. REFLECTOR: Regular cells with parabolic development in shiny anodized aluminum (99.99% efficiency class A), composed of two modular parts to modify the photometric solid (diffuser /asymmetric symmetric). DIFFUSER: Tilting, fixed to the body half hinges. High transparency, with surface microspheres to reduce glare; shock-resistant hardened safety glass). GASKET: Double profile silicone rubber. LED SOURCES: Neutral White LED sources (4000K Ra>80 SDCM3). Integrated LED module dissipated by the structure of the product. No related photobiological risk (class exempt RG0 acc. EN62471). DRIVE: Built-in SMART Driver LED. Constant luminous flux as the power supply voltage changes. Protection against network surges (pulses up to 4kV). Thermal protection with linear reduction of output power. Reliability of the power system: MTBF >100000h in Tatm Ref. Possibility of wireless remote control (also with compatible 1-10V and DALI protocols) and integration of the following functions: Self-dimming, Consumption Monitoring and Programming. INSTALLATION: Device suitable for outdoor use and in industrial environments characterized by the presence of volatile oils and chemicals even in harsh thermal operating conditions. Suitable for installation on normally flammable surfaces, on the wall or on the ground by means of special accessories provided (bracket).
| Type de source | Puissance nominative du lampe | Flux totale | Efficacité lumineuse | CCT | CRI |
|---|---|---|---|---|---|
| LED | 150 W | 23911 lm | 159 lm/W | 4000 K | 80 |
Type de montage
Plafonnier
Forme et dimensions
Longueur: 434 mm
Largeur: 438 mm
Hauteur: 121 mm
Réglable
Rigide
Design
Couleur du luminaire: Gris argent
Designer: Parmeggiani.G
Électrique
Puissance du système: 150 W
Alimentation: ECG
Classe de protection: I
Types de protection
IP: 66
IK: 09
Étiquette: CE, ENEC
Autres indicateurs
Niveau de température: -30...60 °C
Fichier Photométrique
ZIP file