LED outdoor light fitting, VIA, 70 W, 10000 lm, 143 lm/W, Class II, IP66, asymmetrical wide beam, 4000 K, CRI≥ 70, Ta -40 °C/+25 °C, L90>100000 h (@ Ta max), Ready for Light Management Systems (RFL), socket on the top and at the bottom (RFLOU), Pane Safety glass clear, Housing Die-cast aluminium, Colour grey, DB702N. LED outdoor light fitting VIA of the GreenLine series with outstanding sustainable product design. Consisting of powder-coated die-cast aluminum housing, hinged, with safety clip. LED module(s) and ECG mounted on tool-free removable support plates in the upper part of the housing. Cable entry with gland and strain relief, disconnect plug connection and pressure equalization system in the lower part of the housing, flat safety glass, silicone seal, central locking made of aluminum. Zhaga compliant LED modules with high efficiency optics, direct beam, multi-layer technology. ECG with high surge voltage resistance, overload and short circuit protection. Universal mast spigot made of die-cast aluminum for mast spigot 60/76 for mast mounting or mast mounting. Separate reducing accessories are required for mast spigot 42. Tilt adjustment 0°, 5°, 10°, 15° for surface mounting, 0°, -5°, -10°, -15° for surface mounting, scaling on luminaire housing. The light fitting is prepared for later upgrades with components of a light management system with Zhaga socket. RFL luminaires from Schuch use D4i control gear without exception. All D4i Zhaga Book 18 certified controllers and D4i Zhaga Book 18 certified sensors available on the market can be used in combination with RFL luminaires from Schuch. However, controllers and sensors that do not comply with the D4i standard may restrict the functionality of the luminaires and components. In addition, in individual cases, such non-certified components may cause damage to both the luminaires and the components. Resource-saving and environmentally friendly thanks to interchangeability of components (no disposable light fitting). Length 643,00 mm, Width/Diameter 313,00 mm, Height 224,00 mm, Net weight 8,50 kg.
| Type de source | Puissance nominative du lampe | Flux totale | Efficacité lumineuse | CCT | CRI |
|---|---|---|---|---|---|
| LED | 70 W | 10000 lm | 143 lm/W | 4000 K | 70 |
Type de montage
Montage en top, Intégré au mât
Forme et dimensions
Longueur: 643 mm
Largeur: 313 mm
Hauteur: 224 mm
Réglable
Rigide
Électrique
Puissance du système: 70 W
Classe de protection: I
Types de protection
IP: 66
IK: 09
Étiquette: CE, ENEC
Fichier Photométrique
ZIP file