Pendant LED luminaire Design: Single LED luminaire with edge lit microprism panel for pendant mounting. Very flat profile mitred frame, powder-coated with fine structured finish. Back of housing features fixing holes for adjusting the luminaire fastening lengthwise with wire pendants. Panel package made of UV-resistant PMMA integrated into the luminaire frame. Luminaire is suitable for continuous mounting with corresponding accessories. Homogeneous illumination of the panel through lengthwise edge injection of highly efficient mid-power LEDs. Colour rendering in index Ra >= 80, colour temperature 3000 Kelvin (830) Electronic DALI converter for LED, 220-240 Volt, 0/50-60 Hz. Suitable for DC operation and use in central battery systems, 220-240 VDC. Mounting: The luminaires are suitable for pendant mounting with a 1.5 m wire pendant (ZSPT2Z 330; see accessories). 1.5 m mains supply cable with transparent sheath (order separately). Straight joining pieces as well as ones in L, T and cross shapes are available to create F-EDGE2 constructs (see accessories). Luminaire also available in a surface mounting version with corresponding accessory set (see accessories). FEDGE2…PDI… Direct-indirect light distribution. Panels with external micro-prismatic structure for VDU workplace lighting. High-reflectance reflex film, partially light permeable for approximately 50% indirect component.