Product data sheet

Notor Rec LED Opal Flush 3K 2400 white HL Cont. CLO

21843-402

Fagerhult

Installation Luminaire for mounted in ventilated or unventilated suspended ceilings. Installed in suspended ceilings with visible T-bars, VTB (25 or 15 mm) or one-piece suspended ceilings. Accessories available for installation in a concealed T-bar structure (HB) with symmetrically positioned panels. Connection Connection by means of a connection box on top of the luminaire. Wieland Chassis connector 3-way (GST 18i3), with dimming 5-way (GST 18i5). In a continuous installation the luminaire row should always start with a start luminaire. With continuous installation the luminaire units are interconnected with a connection cable in the connection box. Design Luminaire body in natural anodised, extruded aluminium or white enamelled (RAL 9016). With continuous installation an unbroken line of light is achieved, even via a L-coupling. Louvre Opal – plate in frosted acrylic (PMMA). Miscellaneous Accessories and cables, see Accessories. NOTE! Do not mix Low Lumens (LL)- and High Lumen (HL)-luminaires in continuous installations. 

Lamp type Nominal lamp power Total flux Luminous efficacy CCT CRI
LED 50 W 5546 lm 111 lm/W 3000 K 80

Mounting mode 

Ceiling recessed

Shape and measurements 

Length: 2339 mm

Width: 90 mm

Height: 100 mm

Adjustability 

Fixed

Design 

Colour of housing: White

Electric 

System power: 50 W

Protection 

IP: 20

Photometric data

ZIP file