Product data sheet

ALEX P III DA LED (bollard)

9.110.9107.268-3

Leipziger Leuchten

total height: 800mm light standards: for low lighting requirements lamp: incl. 1 DA module; easy to replace colour temperature: 2,700K warm white (CRI 80), 3,000K warm white (CRI 70) or 4,000K neutral white (CRI 70) LED gear: electronic driver; up to 100.000; driver with Constant Light Output (CLO) in order to keep the luminous flux at the same level over the entire life time LED life expectancy: up to 100.000, 50.000 hours/ L 100 for minimum maintenance costs due to an excellent thermal management optical system: directed light (multi layer) provided by an exchangeable, anti-aging lens technology light distribution: narrow and wide beam (cycle path optics) luminaire body: with 1 bracket, made of rectangular aluminium profile, with 2 access doors; powder coated colour: RAL or DB glazing: PMMA RESIST, clear, high-impact resistant wiring: cable junction box for max. 2 Kabel 3 x 2,5mm² up to 3 x 4,0mm² installation: with flange plate to be screwed on a concrete foundation on site or on an additional bolt-on root or with root to be set into the ground accessory: bolt-on root with screws – to be ordered separately application areas: parkways, private areas, small squares, boulevards, schools, home for elderly people, hotels, factory premises, main streets, parks, pedestrian zones 

Lamp type Nominal lamp power Total flux Luminous efficacy CCT CRI
LED 8 W 975 lm 122 lm/W 3000 K 70
ALEX P III DA LED (bollard)

ALEX P III DA LED (bollard) 

Light output 1 (integrated) 

LED 

Mounting mode 

Standing / Bollard

Shape and measurements 

Length: 260 mm

Width: 100 mm

Height: 60 mm

Adjustability 

Fixed

Electric 

System power: 8 W

Protection 

IP: 65

Photometric data

ZIP file