Product data sheet

PIVOT 2.0 W 13°x68° magnet [3000K CRI80 14W 24Vdc]

CP2001000050WU

L&L Luce&Light

Projector for outdoor applications; surface mounted (ceiling, wall, floor); Power consumption: 14W, 10W; Power supply: 24Vdc; Lumen output at source: 1173 lm (3000K, 14W, CRI 90), 1397 lm (3000K, 14W, CRI 80), 821 lm (3000K, 10W, CRI 90), 978 lm (3000K, 10W, CRI 80); Delivered lumen output: 1064 lm (3000K, 25°, 14W, CRI 80), 676 lm (3000K, 25°, 10W, CRI 90), 835 lm (3000K, 25°, 10W, CRI 80), 862 lm (3000K, 25°, 14W, CRI 90); 1 COB LED, 3-step MacAdam, 50 000h L95 B10 (Ta 25°C); LED colour: 2700K, 3000K, 4000K; Optics: 13°, 25°, 37°: optical system consisting of a high-efficiency TIR lens, sharp 50°: SHARP optical system consisting of a plano-convex lens for an extremely well-defined light beam, adjustable 13°x68°: optical system consisting of a high-efficiency TIR lens combined with a high-quality elliptical technical filter and integrated with magnetic material for adjusting the ellipsis (patent pending), optical range 15°—43°: optical system consisting of a high-efficiency TIR lens combined with a magnet-adjusted rotary zoom controller for extreme flexibility of choice of light emission; CRI Colour Rendering Index: 80, >90; Body material: body made of ANTICORODAL EN AW 6082 low-copper-content aluminium alloy for excellent resistance to corrosion, made entirely on a CNC lathe; Finishes: cor-ten/white (RAL 9003)/anthracite/copper finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1000 hours of salt spray; RAL finish on request; Screen material: 3-mm-thick transparent extra-clear glass with vitrified serigraphy, high transmittance to ensure chromatic uniformity of light and tempered for excellent resistance to knocks and scratches; Seals: The NBR nitrile rubber O-rings ensure the fixture’s IP rating is preserved, guaranteeing continued protection; power supply unit not included; includes 1.50/5/10/15/20 m neoprene cable, H05RN-F 2x0,35/0,75 Ø6,3 mm; Ingress protection: IP66; Impact resistance: IK08; manual zoom lens adjustable using a magnet; Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; Operating temperature: -20°C — +45°C; Maximum device temperature: 70°C (Ta 25°C); Glow wire test: 960°; Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006; Appliance class: class III; Weight: 640 g; Dimensions: Ø60x96 mm; Energy efficiency class: A / A+ / A++ (integrated LED module) in accordance with UE 874/2012; Accessories: honeycomb louvre, WB1001E Standard snoot - white, WB1001H Standard snoot - anthracite, WB1001T Standard snoot - cor-ten, WB1001U Standard snoot - copper, WB1002E Asymmetrical snoot - white, WB1002H Asymmetrical snoot - anthracite, WB1002T Asymmetrical snoot - cor-ten, WB1002U Asymmetrical snoot - copper; tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption 

Lamp type Nominal lamp power Total flux Luminous efficacy CCT CRI
LED 14 W 893 lm 64 lm/W 3000 K 80
PIVOT 2.0 W 13°x68° magnet [3000K CRI80 14W 24Vdc]

PIVOT 2.0 W 13°x68° magnet [3000K CRI80 14W 24Vdc] 

Light output 1 (integrated) 

LED 

Mounting mode 

Standing / Bollard

Shape and measurements 

Length: 60 mm

Width: 60 mm

Height: 54 mm

Adjustability 

Rotatable, Tiltable

Design 

Colour of housing: White

Electric 

System power: 14 W

Appliance Class: III

Protection 

IP: 66

IK: 08

Photometric data

ZIP file