TECHNICAL CHARACTERISTICS: Luminaire for lighting with hidden LED technology, direct/indirect lighting for ceiling or suspension. Equipped with SmartDrive LEDs (possibility to integrate programming, dimming and consumption monitoring functions) energy-saving electronic power supply. DEGREE OF PROTECTION: IP20. TEMPERATURE RANGE: -20÷40°C. BODY: Painted steel sheet with polyester powders of white color RAL 9003. The device is equipped with a 3-poly clamp accessible by a tilting rear door. OPTICALSYSTEM: Complex, regular cell lamellar optics in anodized and shiny aluminum (99.99% Efficiency Class A+ and diffused PMMA lenses. Dark light low luminance device. Symmetrically distributed photometric solid collected (batwing). Suitable product for installation in environments with video terminals (UNI-EN12464-1). Glare limit at 500hd/sqm for corners above 65° longitudinal and transverse. LED SOURCE: Integrated LED modules: Warm White (3000K Ra>82; 3SDCM). The LED module is dissipated by the integrated heat disposal system. DRIVE COMPARTMENT: Built in. AC-DC Led Driver with constant current, with PFC section in input to ensure constant flow as the power voltage changes. SELV direct current output. Constant luminous flux as the power supply voltage changes. Protection against network surges. Power system reliability: MTBF >65000h in Trif. Possibility of wireless remote control (also with compatible 1-10V and DALI protocols) and integration of the following functions: Self-dimming, Consumption Monitoring, Programming, Remote Control of the place. INSTALLATION: For suspension or ceiling installation even on normally flammable surfaces.