Installation Recessed mounting in ventilated or unventilated ceilings. Fixing brackets included with luminaire. An assembly plate should be used when installing in soft tile ceilings. The luminaire must not be covered with insulation. For further details please refer to the assembly instructions. Connection Connection in driver box. The driver box can be positioned next to the luminaire. Snap-in terminal block 3x1.5 mm² (5x1.5 mm² where dimming is required). Through-wiring- possible. Design Luminaire in white (RAL 9016) structured finish. Luminaire housing of enamelled deep drawn aluminium. Diffuser of opalised acrylic. Dimming CLO (Constant Light Output) maintains the correct light from the luminaire for the duration of its service life.
Lamp type | Nominal lamp power | Total flux | Luminous efficacy | CCT | CRI |
---|---|---|---|---|---|
LED | 28 W | 3224 lm | 115 lm/W | 4000 K | 80 |
Mounting mode
Ceiling recessed
Shape and measurements
Height: 6.10 in
Diameter: 22.95 in
Adjustability
Fixed
Design
Color of housing: White
Electric
System power: 28 W
Protection
IP: 20
Photometric data
ZIP file