Installation Four securing holes. For recess or surface mounting on ceilings or walls. Brackets for recessed installation ordered separately, please see accessories. There are holes for a surface mounted installation socket. Connection 230 V integrated LED driver. Snap-in terminal block 5x2.5 mm². 1-phase through-wiring possible. Cable entry at rear or via knockouts for surface mounting, through wiring 0° or 180°. Design Luminaire body of polycarbonate and diffuser of opal polycarbonate. Emergency lighting The product is equipped with the ability to connect a monitoring system based on communication via DALI. The system is not dependent on a DALI system being connected or in operation. Dimming e-Sense smartSWITCH – luminaire with PIR sensor for presence detection on/off, IP 20. e-Sense Detect – microwave sensor for on/off function, or absence dimming with the option of switch-off function. e-Sense Move – wireless control between luminaires. Microwave sensor for the on/off function, or absence dimming with the option of switch-off function. Remote control is required for programming. Accessories Anti-ligature casing in white enamelled sheet steel. Supplied with safety screws (tamper-proof torx) IK10, IP 55. Outdoor casing in lacquered aluminium, IK10, IP 55 with the possibility of a surface mounted mains cable.