Outdoor luminaire for installation on wall or on pole. Configuration: die-cast aluminium structure. EN AB-47100 (low copper content) Double layer coating for high resistance to corrosion: The low copper Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. The luminaire is equipped with a graduated stainless steel fixing plate allowing a precise installation on the wall.
Verfügbare Bestückungen | Lampen-Nennleistung | Lampen-Lichtstrom | Leuchten-Lichtausbeute | CCT | CRI |
---|---|---|---|---|---|
1 x Hochdruckentladungslampen | 70 W | 6500 lm | 55 lm/W | 3000 K | 82 |
Montageart
Wandanbau
Bauform und Abmessungen
Länge: 245 mm
Breite: 128 mm
Höhe: 327 mm
Ausrichtbarkeit
Schwenkbar
Elektrik
Systemleistung: 70 W
Schutzklasse: I
Schutzeigenschaften
IP: 65
IK: 07
Photometrie-Dateien
ZIP file