This wall-recessed light family is to be used in the gardens, stairways, walkways and pathways where general lighting is required.They also can be used indoor with the choices of compact fluorescent and incandescent lamps.With the use of safety glass cover, they provide the users less of possible danger.The installation depth is considerbly less so they can be installed in many limited architecture environment. Specification • Fixture is manufactured in compliance with international standard of general requirement IEC 60598-1, fxed general purpose luminaires IEC 60598-2-1 and recessed luminaire IEC 60598-2-2. Electrical protection class 1. IP65. • Body housing and cover in high-pressure die-cast aluminium ADC12 alloy. Wall installation housing in polypropylene. • Nano Ceramic surface conversion, resistant to corrosive environment. Luminiare primarily coated with epoxy resin and top coated with UV stabilized polyester powder and cured in digital temperature controlled chamber at 200°C. • Impact resistant white coate safety tempered glass. Able to withstand sudden change of temperature up to 250 C. • Weather proof and durable silicone gasket. Service temperature -40 to +200 C. All external screw is in 316 stainless steel with silicone grease dipping. • Cable entry protected by two weather proof IP67 PG11 synthesized rubber grommet for H07RN-F cable 3G x1.0 Possible for through wiring. • G24d-1 holder in PBT phosphor bronze contact from AAG Stucchi - Italy / ENEC approved. For compact fluorescent lamp. T140 rating 2A-250V. E27 ceramic nickle-coated contact from Vossloh Schwabe - Germany / ENEC approved. For incandescent lamp. T270 rating 4/250/5kV. • Magnetic ballast from Vossloh Schwabe - Germany / ENEC approved. 230V 50Hz tw130. For compact fluorescent lamp. B2 EEI class. • 1x0.75 tinned copper silicone rubber insulated cable from CET Eletric - Italy / IMQ approved. 2kV / -60 to +180 C service temperature. • Connector in PA6.6 nickle-plated brass insert. 600V/24A. -40 to +130 C service temperature. Cross section 2.5mm. VDE approved. Wiring provided with earth connection. Available Color Black - RAL9005 (replace last 2 digits of ordering code with 01) Graphite - RAL7016 (replace last 2 digits of ordering code with 02) Dark Grey - RAL7037 (replace last 2 digits of ordering code with 03) Aluminium Silver - RAL9006 (replace last 2 digits of ordering code with 04) White - RAL9010 (replace last 2 digits of ordering code with 06)