TECHNICAL CHARACTERISTICS: Industrial reflector in die casting of gray painted aluminum. LEDs technology, equipped with SmartDrive LEDs (possibility to integrate programming, dimming and consumption monitoring functions) energy-saving electronic power supply. The device is designed to withstand magnetic disturbances typical of industrial environments (EN 61000-6-2). PRODUCT PROTECTION GRADE: IP66 PRODUCT IMPACT RESISTANCE: IK09 (10J). TEMPERATURE RANGE: -30÷60°C BODY: High mechanical resistance in die-cast aluminum painted with gray polyester powders (RAL 7040). Stainless Steel closing hooks and hinges (AISI 304). Integrated rear dissipation fins. Cable input with PA66 Nylon press (PG13.5 8÷12mm) on the back. REFLECTOR: Lamellar, 16 regular cells with parabolic development in shiny anodized aluminum (99.99% efficiency class A). Diffuser, concentrating or elliptical optics. DIFFUSER: Tilting, fixed to the body half hinges. High transparency, with surface glare reduction microspheres (UGR <22); shock-resistant hardened safety glass). GASKET: Double profile silicone rubber. LED SOURCES: Neutral White LED sources (4000K Ra>80 SDCM3). Integrated LED module dissipated by the product structure. Expected service life (L80B20) of the sources at maximum temperatures of the continuous >60000h. No related photobiological risk (class exempt RG0 acc. EN62471). DRIVE: Built-in SMART Driver LED. Constant luminous flux as the power supply voltage changes. Protection against network surges (pulses up to 4kV). Thermal protection with linear reduction of output power. Reliability of the power system: MTBF >100000h in Tatm Ref. Possibility of wireless remote control (also with compatible 1-10V and DALI protocols) and integration of the following functions: Self-dimming, Consumption Monitoring and Programming. INSTALLATION: Device suitable for use in industrial environments characterized by the presence of volatile oils and chemicals even in harsh operating thermal conditions. Suitable for installation on normally flammable surfaces, ceiling or suspension by means of special accessories provided. Suspension mounting on 2 ceiling points.