Housing: in die-cast aluminium with cooling fins integrated in the cover. Optics: in high-performance prismatic and polished aluminium. Diffuser: tempered glass, 4 mm thick, resistant to thermal shock and impact (UNI EN 12150-1:2001). Coating: the fully automated powder-coating cycle involves a polyester-based, salt-spray corrosion-resistant and UV-stabilised paint. Special coating: Upon request: protective coating recommended for marine environments within 5 km (3 miles) of the sea. Heat Sink: the heat sink is designed and made to allow the LEDs to operate at temperatures capable of ensuring excellent performance/output and long service life. Low flicker: luminaire with very low flicker: evenly distributed light for greater visual safety. Photobiological risk: exempt risk group according to EN62471. : EN60598-1. They have a degree of protection according to the EN60529 standard. Equipment: - with galvanised and painted bracket - cable for electrical connection - EN 61547 compliant surge protection - silicone rubber gasket - external screws and bolts in stainless steel. Sensors: Built-in RADAR SENSOR (sub-code -19 at an extra price): is an automatic sensor that immediately sense the presence of people’s movements and anyone walking past. When there is movement within the sensor’s detection range, the light will remain ON. When no further movement is detected, the light will switch OFF after a pre-set time. Factory settings Power supply: 220-240V AC 50/60 Hz Detection area ceiling: 360° Motion detection speed: 0,5-1-1,5 m/s Mounting height ceiling: 2,5m÷3m Energy consumption: <lt/>0,5 W (stand by) Hold time: 1 min Ambient light: Disable Remote control cod. 81418618 (to be purchased separately) that allows changing the parameters even after installation is complete and without the need to directly access the fixture. Temperature Chart (Description): -20 °C ÷ +40 °C On request: - version with presence sensor (subcode -19) - double insulation (subcode -14) - CLD-D-D (DALI) wiring (subcode -0041)